OpenLoong

OpenLoong Qinglong

Open-source full-size (1.85 m, 80 kg) humanoid reference platform with 43 active DoF; its hardware drawings, control software and datasets are published by the OpenLoong community.

Catalog dataResearch platformBipedal humanoidOpen source
Height
1.85 m
Mass
80 kg
Total DoF
43
Payload
20 kg
OpenLoong Qinglong humanoid robot upper body, blue-tinted renderImage: © OpenLoong (openloong.org.cn)
OpenLoong Qinglong humanoid robot upper body, blue-tinted render · Source
ARworks

ARworks status by function

What works with this robot at ARworks today – and what does not.

Catalog data No ARworks integration for this robot: catalog data only. Integration follows a per-robot assessment.

OpenLoong Qinglong

Technical data

From manufacturer or primary sources. The superscript points to the source.

Geometry

Generation / revisionHardware version V2.5 (drawings and 3D files uploaded 2025-09); technical document dated 20241Factory
Height1.85 m2Factorystanding; per dimension drawing (Fig. 7) 1850 mm is the height
Depth0.3 m2Factorystanding, per side-view dimension drawing
Mass80 kg2Factory
Arm span2.192 m2Factoryarms outstretched, per dimension drawing
Reach / arm length0.6 m2Factorysingle-arm working radiusminimum value per source (≥)

Kinematics

Total DoF432Factoryactive DoF, including hands (2×6) and head (2)
DoF per leg62Factoryper leg
DoF per arm72Factoryper arm
Waist32Factory
DoF per hand62Factoryactive DoF per hand; 19 DoF in total including passive ones

Payload and locomotion

Payload20 kg2Factoryoverall load capacity (载重), no condition statedminimum value per source (≥)
Walking speed5 km/h2Factorywalking / trottingminimum value per source (≥)
Maximum speed9 km/h2Factory maxfast runningminimum value per source (≥)
Documented locomotion skillsWalking, trotting and running; flat, gravel and sand terrain; 13 cm steps and 20° slopes; impact resistance2Factory

Actuators and hands

DriveEtherCAT joint drives (servo controller 11–95 V DC, ≥130 A, current loop ≥10 kHz); peak torque per joint 11.5–396 N·m2Factory
Max joint torque396 N·m2Factory maxhip pitch and knee joints, peak
Hand / gripperModular quick-change dexterous hand (left/right): 19 DoF, 6 active; tactile sensor arrays in fingertips and palm; ≤600 g, hand payload ≥5 kg, 8.4 V2Factory

Sensing and compute

VisionDepth vision sensor in the head; front and rear depth cameras at the waist (640×400@30 fps, FOV 80.5°×55.2°); four 120° 1920×1080 surround cameras at the waist2Factory
Other sensing3D LiDAR (chest/neck), depth cameras, voice module, olfactory sensor, surround cameras, MEMS sensor in the control computer, tactile sensing in the hands2Factory
Onboard computeMotion-control computer with up to 400 TOPS AI compute; 4× gigabit Ethernet, 8× CAN, ≥6× USB3, RS422/RS232; EtherCAT bus to the joints2Factory

Energy and connectivity

Battery capacity30 Ah2Factory72 V (19S) battery pack, ≤9 kgminimum value per source (≥)
Nominal voltage72 V2Factorybattery rated voltage
Runtime3 h2Factoryno condition statedminimum value per source (≥)
Charging / swapExternal charging port with charger; max. charging current ≥15 A2Factory
Connectivity5G and Wi-Fi 6; the control computer adds 4G and GPS/BeiDou positioning2Factory

Development

SDK / APIOpenLoong-Dyn-Control: open-source MPC + WBC motion-control framework (C++) with walking, jumping and blind obstacle-stepping examples4Factory
Robot description filesAzureLoong.urdf and MJCF (AzureLoong.xml) models in the OpenLoong-Dyn-Control models folder5Factory
SimulationMuJoCo (walking, jumping and blind obstacle-stepping demos in OpenLoong-Dyn-Control)4Factory
LicenseHardware: Solderpad Hardware License v2.1 (wraps Apache-2.0); software: mostly Apache-2.06Factory
Size
0.5 m1 m1.5 m2 m1.75 mPerson, 175 cm1.85 mQinglong
Editorial notes
  • Many values are published as minimums (≥); these carry a note.
  • The sources disagree: battery 2052 Wh (homepage) vs at least 30 Ah at 72 V (hardware docs); dual-arm payload at least 5 vs at least 10 kg.
Sources
  1. QingLoong Full-Size Universal Humanoid Robot Hardware Open-Source Content (OpenLoong-Hardware repository, README + QingLoong V2.5 folder) — OpenLoong / Humanoid Robot (Shanghai) Co., Ltd. · checked 2026-11-17
  2. 青龙全尺寸通用人形机器人硬件开源内容 (technical document PDF, 25 pp.) — Humanoid Robot (Shanghai) Co., Ltd. · checked 2026-11-17
  3. 青龙·公版机 | OpenLoong (project page) — OpenLoong / Humanoid Robot (Shanghai) Co., Ltd. · checked 2026-11-17
  4. OpenLoong Dynamics Control (GitHub repository, README) — OpenLoong / Humanoid Robot (Shanghai) Co., Ltd. · checked 2026-11-17
  5. OpenLoong-Dyn-Control models folder (AzureLoong URDF / MJCF) — OpenLoong / Humanoid Robot (Shanghai) Co., Ltd. · checked 2026-11-17
  6. OpenLoong-Hardware license (Solderpad Hardware License v2.1) — Humanoid Robot (Shanghai) Co., Ltd. · checked 2026-11-17
  7. 人形机器人(上海)有限公司官网 (company homepage) — Humanoid Robot (Shanghai) Co., Ltd. · checked 2026-11-17

Data sheet last checked: 2026-11-17 · China · Manufacturer names and images belong to their owners. Being listed in the catalog implies no partnership or integration.

Start a project

Which robot, for what task?

Tell us the robot model, the use case and the working environment – we prepare the first meeting from that.

* required